Free web tool

Drum Wrap Studio

Calculate cut-ready vinyl wrap templates for any drum shell, then design multi-layer wraps and preview them on a 3D drum.

  • Searchable drum library plus custom shells and measured circumference
  • Lug and hardware hole placement with a lug spacing reference
  • Exports 1:1 PDF, SVG and DXF cut files ready for your vinyl cutter
  • Multi-layer pattern designer with a live 3D drum mockup
A 14 by 6.5 inch snare drum wrapped in black with flowing orange sparkle ribbons, rendered in Drum Wrap Studio's 3D preview

How to use it

  1. Pick or measure your drum. Start from the library or type in the bare shell’s diameter and depth. A tape-measure circumference is the most accurate input.
  2. Set the hardware holes. Add lug rows, tom mounts and badge vents so they get cut out of the template.
  3. Choose the seam. Hide it behind a lug or let the tool pick the widest gap.
  4. Export and test-cut. Download the PDF, SVG or DXF at true scale. Check the scale square, then cut scrap vinyl first.
  5. Design it (optional). Switch to the Wrap Designer tab to stack patterned vinyl layers and preview the result in 3D.

Everything runs locally in your browser and your saved drums stay on your machine. Always do a test cut before you cut good vinyl.